Hi guys,
Got a fully working 2012 R2 DA cluster using Windows NLB. I'm using a single NIC config thus all client use IP-HTTPS.
From a remote access POV it's all working great and has been for a few weeks.
Next I'm trying to get SCCM remote control to work, which requires ISATAP as we're not using native IPv6 across all of our networks. I've followed this blog (created 3x new custom DNS A records - one for the VIP, one for each of the DIP's all with the same name, GPO that enables ISATAP and sets the custom DNS A records as the ISATAP router: http://blog.msedge.org.uk/2011/11/limiting-isatap-services-to-uag.html)
However I just can't reach my test laptop I have connected via DA. From ONE of the DA nodes I can ping and even SMB to the DA client no problems. But from my SCCM server which I've added to the manage out config of DA and applied the ISATAP GPO (which is applying - I have a valid ISATAP IPv6 address now).
Regardless of what I do I just can't ping, SMB or remote control the DA client from the SCCM server (ISATAP enabled) but I can from a DA node.
Anyone suggest anything? I'm getting a little stuck!
Thanks - Steve