Okay here is one for you.
We have two direct access appliances - Both have been configured seperately to ensure that they are functioning correctly (Network etc).
I have then removed the configuration for Direct Access and reconfigured, we are operating in multisite.
Clients will connect to the first Site fine DA1 and when I select the second site DA2 the clients will not connect completely.
I can see the client in the remote access connections but but there is no user tunnel or infrastructure tunnel created.
The client has an active IP-HTTPS interface, but no connection to any resources.
The configuration was completed via the Remote Access GUI on the server.
Since then I have reconfirmed that both appliances work by removing the configuration and setting them up one in turn and testing as singular devices.
Da1 - setup and tested on own - worked
Da1 - Configuration removed and gpo updated on all respective machines
Da2 - setup and tested on own worked
da2 - Configuration removed and gpo updated on all respective machines
Then the current configuration is
Da1 Setup first and multisite enabled with da1 as only entry point - working fine
Da2 - configured as second entry point using wizzard - configuration fine - all showing green for both servers, but clients cannot connect to da2 just show in remote connections with no authentication and an active IP-HTTPS adapter.
Any pointers would be appreciated.