DirectAccess Forwarding is disabled on the Teredo server

Had to change the public IPs on my DirectAccess server over the weekend.  I changed the IP on my WAN NIC then went through the Remote Access Setup wizards to change and publish my configuration.  The only issue I've encountered since doing this is Teredo is not working properly.  The Operations Status page in the Remote Access Management Console says "Forwarding is disabled on the Teredo Server".  

The Teredo Tunneling Pseudo-Interface shows as disconnected.  It shows as working properly in Device Manager.  Not really sure what to do.

C:\Windows\system32>netsh int ipv6 show int

Idx     Met         MTU          State                Name
---  ----------  ----------  ------------  ---------------------------
  1          50  4294967295  connected     Loopback Pseudo-Interface 1
 20          10        1280  connected     isatap.{1C745FB2-FBBE-46D9-A86C-21106
69490AD}
 21          10        1280  connected     isatap.{11133F5F-F930-4897-B253-EE603
7AFFBE8}
 12           5        1500  disconnected  Ethernet
 24          10        1280  connected     6TO4 Adapter
 25          50        1472  disconnected  Teredo Tunneling Pseudo-Interface
 27          50        1280  connected     IPHTTPSInterface
 28          50        1280  connected     isatap.{6E06F030-7526-11D2-BAF4-00600
815A4BD}
 26           5        1500  connected     LAN Team
 23           5        1500  connected     WAN Team

C:\Users\richardl>netsh int teredo show state
Teredo Parameters
---------------------------------------------
Type                    : server
Virtual Server Ip       : 0.0.0.0
Client Refresh Interval : 30 seconds
State                   : offline
Error                   : unable to open primary socket