How to configure array for UAG 2010 with topology Between a frontend firewall...
Hi,We want to publish exchange 2013 through UAG 2010. What is the best topology for UAG 2010?Can we configure UAG 2010 arrawy with topology "Between a frontend firewall and a backend firewall" ?Can we...
View ArticleDirectAccess 2012R2 NLB and DNS
After i configured DA in NLB, i am getting DNS error status that DNS server is not responding to DNS quires. NLB VIP became 1st server NIC. I have 2 NIC NLB configuration and going port forwarding to...
View ArticlePrevent multiple simultaneous (concurrent) logons with the same account?
Is there any way, with Direct Access on Windows Server 2012 R2, to prevent multiple simultaneous (concurrent) connections by a single user on different PC's? I realize this is not a native function of...
View ArticleClik here to view.
DirectAccess on Server 2012 R2 with Single NIC behind NAT on IPv4 only...
I hit this problem at a customer site and can re-produce it in a simple lab. Lab environment: servers:1x Server 2012 R2 DC and DNS server - DC1 - 10.0.0.11x Server 2012 R2 DirectAccess (DA) server -...
View ArticleDirectAccess 2012R2 - Web Filtering
I have a need to do web filtering (I think). What I have is an external web site (not Corpnet) that can only be accessed from a Corpnet IP address range. Based on this When I go to that web site Split...
View ArticleIPhttps interface error
C:\Windows\system32\LogSpace\{FF50E15D-253A-48B3-9821-CF5A1AC6B096}>netsh int httpstunnel show interfaces Interface IPHTTPSInterface (Group Policy) Parameters...
View ArticleRouting problems among HQ and Clients with DA on Server 2012 R2 because of...
Hi all,We are trying to set up the following scenario: A RODC acting as a DirectAccess Client running BrachCache in hosted mode for those laptops connected at the brach location.Both the HQ and the...
View ArticleDirectAccess (Windows 2012R2) single NIC using IP-HTTPS for Windows 7...
I am currently planning for DirectAccess on Windows server 2012 R2. I am considering to use a single nic on the server and behind a firewall (NAT). As such I will be using IP-HTTPS.The concern here is...
View ArticleDirect Access 2012 is no longer working after group policy to turn on UAC
Direct Access 2012 has been working great. All computers originally had UAC turned off and we decided to turn on through Group Policy. After UAC was turned on, Direct Access now has a Red "X" and will...
View Articlehttp keep-alive with SOAP webservices
Just had an interesting experience with a web service setup behind UAG...under low load conditions all SOAP responses were coming across with no issue...once a high load was introduced by the client...
View ArticleDirect Access with OTP - Error Code 0x80040004
Hello everyone,I am currently trying to get Direct Access working with RSA one time passwords. Everything seems to work fine up until I put in my token code on the mobile device (Surface Pro 3). After...
View ArticleDA 2012 R2 - cannot manage out
In our environment, we have setup Server 2012 R2 DA (single server) with Windows 8.1u1 clients.All DA hotfixes have been applied as per http://support2.microsoft.com/kb/2883952/en-us?sd=rssClients can...
View ArticleWindows Remote Assistance and UAG DirectAccess
I want to be able to offer remote assistance to laptop users. Remote Assistance works when the laptop is on the LAN, but when the laptop is not on directly on the LAN but does have a DirectAccess...
View ArticleWebsites not available on DirectAccess
Dear,I'm confronted with the following issue:We have an internal and external DNS server. Several of our subdomains point outward to servers hosting our websites elsewhere. One of these is not...
View ArticleNew certificate (CA) - Direct Access
HeyWe have demoted an old CA (2003) and create a new 2012 R2 CA. (completely new PKI infrastructure)Is it possible to "accept" both CAs in Direct Access? (for a couple of months - until all the clients...
View ArticleURL Set Issue with Methods
Hello,I have a problem with configuration of what I thought would be a simple URL Set entry.Some info:Trunk Name - TestTrunkApplication - WebTestApplication Type - "Web"Web_Rule1 (Automatically...
View ArticleDirect Access Windows 8 Client IPHTTPS active but no connectivity
This is a bit strange - I've set up a simple Server 2012R2 Direct Access server with single NIC behind a NAT, self signed cert though.When I try and connect I just get "Connecting" forever - but when I...
View ArticleUAG - Clientside Config
Hi - can I ask if the following is possible please?We would ONLY like to deploy the SSTP as an application once a user has authenticated to our UAG Portal. However, ive noticed that its only possible...
View ArticleReach direct access clients from on premise servers
Hi we have a direct access setup which uses IPHTTPS (no isatap, 6to4 or teredo) with one internal interface, so it uses Natting. Everything is working fine but I'm trying to reach my Direct Access...
View Article